Beskrivelse
MATRIX 55: Til CE standarden
Med dens indbyggede universelle lysdæmper, bagbelyste tangenter og trådløse Z-Wave kommunikation er MATRIX 55 det logiske valg når du skal vælge betjeningstryk til dit smart home.
Den indbyggede lysdæmper kan kontrollere en lokal belastning, fx et lampeudtag og dermed erstatte en standard et-polet afbryder.
Brug MATRIX 55 der, hvor du vil dæmpe lyset i forskellige niveauer i forhold til tid på dagen og året. Vælg skarp belysning til rengøring og madlavning, men blød belysning om aftenen for at forberede dig på søvnen.
Sofistikeret lysdæmper
Lysdæmperen kan dæmpe alle dæmpbare lyskilder fra 0-250 W. Selv dine energibesparende LEDer.
Kompatibilitet
MATRIX 55 basen er konstrueret så den passer i standard CE vægdåser (60 mm). Fronten er designet til at passe i standard 55 mm rammer inklusiv GIRA System 55, Elko Plus og Exxact.
Forbedrer Z-Wave-netværket
Fungerer som Z-Wave netværks-repeater så netværket forstærkes.
Taktilt tryk
De fire tangenter er designet med kvalitet og taktilitet for øje.
4 Z-wave Scene Controllere
Op til 16 forskellige muligheder med enkelt-tryk, dobbelt-tryk, tre-dobbelt tryk, langt tryk og slip på hver af de fire tangenter.
Rengøringsvenlig
Elegant og rengøringsvenlig front. Ingen synlige mærker fra fingeraftryk.
Multifunktionel bagbelysning
Tangenterne kan lyse i alle farver og bruges til at vise status for en lampe, til orienteringslys om natten, visuel alarm og meget mere.
Trådløse opdateringer
Firmware kan opdateres via Z-Wave netværket (OTA firmwareopdateringer).
Z-Wave Plus
Baseret på Z-Wave Plus 500 Series platformen.
Bagbelyste tangenter
Få inspiration til hvad, du kan bruge de bagbelyste tangenter til.
GÆSTEMODE
Har du nogensinde haft gæster, der var forvirrede over dit smart home? Sæt dit hjem i gæstemode og lys udvalgte felter op i grøn. Dette er dine gæstetryk.
GÆSTEMODE
Har du nogensinde haft gæster, der var forvirrede over dit smart home? Sæt dit hjem i gæstemode og lys udvalgte felter op i grøn. Dette er dine gæstetryk.
ÅBENT VINDUE
Forlad aldrig igen dit hjem med åbne vinduer! Sammen med en dør-/vinduessensor kan du få MATRIX i entréen til at lyse op, hvis en dør eller et vindue står åbent.
ÅBENT VINDUE
Forlad aldrig igen dit hjem med åbne vinduer! Sammen med en dør-/vinduessensor kan du få MATRIX i entréen til at lyse op, hvis en dør eller et vindue står åbent.
BLIV ALVIDENDE FORÆLDER
Lad MATRIX lyse op i stuen hvis skrivebordslampen, natlampen eller stikkontakten ved computeren er tændt på børneværelset. Men sch, lad dem aldrig vide hvordan du ved det!
BLIV ALVIDENDE FORÆLDER
Lad MATRIX lyse op i stuen hvis skrivebordslampen, natlampen eller stikkontakten ved computeren er tændt på børneværelset. Men sch, lad dem aldrig vide hvordan du ved det!
Tilpas din MATRIX
Make it easier for you, your spouse and your guests to navigate your Logic Home. With our Logic Symbol Customizer you can freely combine symbols from our library and your text to fit your MATRIX’ functions.
The symbols are laser engraved on the pushbuttons, thereby lasting for the lifetime of the product.
Konstruktion
- Basen indeholder al magien og passer i standard CE vægdåser (60 mm).
- Valgfri ramme med indre mål på 55×55 mm – ikke inkluderet.
- Frontmodulet har LED dioder og metalfjedre som fæstner frontmodulet til basen
- Anti-tyveri skruen gør Matrix 55 egnet til offentlige bygninger og virksomheder.
- Tangenten er lavet af translucent hvid plast, der matcher dine eksisterende rammer, stikkontakter og afbrydere.
Warning! Only authorised technicians under consideration of the country-specific installation norms may do works with 230 Volt mains power. Prior to the assembly of the product, the voltage network has to be switched off.
MATRIX 55 is designed for fitting into standard 60mm CE wall boxes. For compatible design frames, see section about design frames.
For easy installation MATRIX 55 is provided with a connection terminal with push-in terminations. The cable must have a stripped length between 9 and 10 mm. The maximum conductor size is 2.5 mm2, or maximum 1.5 mm2 for stranded conductors with a ferrule with plastic collar.
Wiring
Dimmed output (~), Neutral (N) and Line (L) must be connected according to the diagram below. Contacts with same markings (N or L) are internally connected and can be used for cable looping.
Cable connection / Disconnection
When installing a MATRIX 55, simply push solid cables into the connection terminals. Stranded cables must be connected by use of the release-buttons. Activate the release-button on the terminal with a slotted screwdriver with a 2.5 mm slot while pushing in the cable
When removing the cables, use the release-buttons as described above.
Fitting
Fit MATRIX using the elements in the figure below. The safety screw (4) is necessary in public buildings and businesses to avoid theft. Use bullets D) and F)-G) to mount the safety screw.
- Mount the Insert (1) in the wall box using the wiring diagram above, regard the UP arrow.
- Add the insert to the Z-Wave system, see Chapter 6.
- Place the design frame (2) over the insert (1).
- (Optional) Remove Pushbutton cover (5) from the front module.
- Plug the Pushbutton base (3) into the Insert (1), regard the UP arrow.
- (Optional) Fasten the Pushbutton base to the Insert with the Safety screw (4).
- (Optional) Snap on the Pushbutton cover (5).
Demounting the Pushbutton Cover when the Safety Screw is mounted
With the safety screw mounted, the pushbutton cover must be removed from the Pushbutton base before unscrewing. Use the following steps.
- Loosen the cover with a slotted screwdriver in one side in the slot between the cover and the cover frame;
- First insert the screwdriver in the right top just below the upper snap (a) and pop out the snap.
- Afterwards insert the screwdriver in the right bottom just above the lower snap (b). Now release the entire right side.
- Hold the right side out from the wall while the left side is released with a single pop somewhere on the left side (c).
- Now it is possible to unscrew the safety screw and remove the front module and insert from the wall box.
Adding/Removing
MATRIX 55 is a SmartStart enabled product and can be added into a Z-Wave network by scanning the Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within 10 minutes of being switched on in the network vicinity.Find the DSK, QR code and PIN Code on the front of the insert module.
Add MATRIX 55 to a network with Classic Inclusion by pressing once on the switch (I) through the hole with a non-conductive object. The LED inside the module will start blinking.
Use same procedure for removing MATRIX 55 with Classic Exclusion.
If MATRIX 55 already belongs to a Z-Wave network, the remove process must be performed before adding it in a new network. Otherwise, the adding of the device will fail.
SmartStart Inclusion
Classic Inclusion
Restore Factory Settings
Factory settings are restored by pressing the switch through the hole (I) and hold it for min. 10 seconds.
Compatible Design Frames
MATRIX 55 is compatible with a range of design frames from other manufacturers. The design frame must have a 55×55 mm opening and a depth of min.10 mm. This includes, but is not limited to, the following frame systems:
- Schneider Electric, Exxact
- Elko Plus
- GIRA, System 55
- Merten, System M
- Busch-Jaeger, Basic 55
