zwave  Converts devices into Z-Wave

Can be used for controlling up to six 230V AC and/or DC loads through the Z-Wave network. Each relay switch is rated for loads of up to a maximum of 16A.

scene Scene Control

The ZIF modules makes it possible to activate predefined scenes in a Z-Wave Controller device.

DINrail  Easy Mounting

Fits into a standard M36 DIN rail for easy mounting.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

PLUS  Z-Wave Plus

Based on the Z-Wave Plus 500 Series platform.

Initiation of Z-Wave add/remove is fulfilled by activating a push-button through a little hole in the front of the module.

ZIF modules are equipped with an LED diode in the front of the module for indicating status.

ZIF5020, ZIF5028 and ZIF5029 require an external power supply of 10-24V DC. Use as many ZIF modules on the same power supply as you want.

Connect your existing socket
outlets, relay switches and motors
to the Z-Wave network with
ZIF5020ZIF5028 or ZIF5029
Connect the sensors
in your home to
the Z-Wave network
with ZIF5028
Get your underfloor
heating connected to
the Z-Wave network
with ZIF5020
Read your
meters over the
Z-Wave network
with ZIF5029

Choose your ZIF Module variant:

ZIF5020: Interface for Underfloor Heating

With ZIF5020 it is possible to connect up to 10 valve actuators for underfloor heating systems and control them over the Z-Wave network. Furthermore, regular sensors or contacts can be connected to the ZIF module and thereby control your Z-Wave devices.

ZIF5020 is a general pupose Z-Wave DIN-rail module with 10 digital ouputs and 4 digital inputs. 

output  10 Digital Outputs

Connect up to 10 valve actuators in a hydronic underfloor heating system and get a Z-Wave Controller to perform the heating algorithm. The 10 digital outputs can also be connected to other non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave.

input  4 Digital Inputs

Connect up to 4 simple digital sensors, e.g. motion sensors or contacts (wall switches or door/window contacts) to control the Z-Wave devices in your home (e.g. Z-Wave dimmers, motors and power plugs)

See drawing and downloads for details.

 

Download “ZIF5020 Datasheet” zif5020_datasheet.pdf – Downloaded 40 times – 286 KB

EAN: 5714090000080

Technical Data
DIMENSIONS (HXWXD) 85 mm x 105 mm x 60 mm (M36 6 module)
POWER SUPPLY 10 – 24 V DC
2 terminals, 1 x power, 1 x 0V
CLAMPS Screw terminals 0.2 – 2.5 mm² / 24 – 12 AWG
OUTPUTS 18 terminals: 10 x low-side switch, 8 x power supply output
Digital low-side switch, max 60Vdc, 1A
INPUTS 8 terminals: 4 x input, 4 x 0V
Digital potential-free, Max. 10 V DC
Input impedance: 10kOhm
POWER CONSUMPTION Max. 3.5 W / Standby 0.5 W
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S0, S2 Unauthenticated, S2 Authenticated
APPROVALS CE
DS/EN 50491-3:2009
DS/EN 60669-2-1, DS/EN60669-2-1/A1, DS/EN 60669-2-1/A12, DS/EN 60669-2-1/AC:2007

ZIF5028: Interface for Automations Systems

ZIF5028 makes it possible to control, automatize and make Z-Wave scenes for regular devices in your home.

The module is a general purpose Z-Wave I/O interface module with 6 relay switches and 6 digital inputs.

output  6 Relay Switches

Connect up to 6 non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave. The digital outputs can also be connected to valve actuators (24V) in a hydronic underfloor heating system.

input  6 Digital Inputs

Connect up to 6 regular sensors, e.g. motions sensors or contacts (door/window contacts or wall switches) to control your Z-Wave devices.

See drawing and downloads for details.

 

Download “ZIF5028 Datasheet” zif5028_datasheet-2.pdf – Downloaded 252 times – 324 KB

 

EAN: 5714090000097

Technical Data
DIMENSIONS (HXWXD) 85 mm x 105 mm x 60 mm (M36 6 module)
POWER SUPPLY 10 – 24V DC, 8 – 24V AC
2 terminals, 1 x power, 1 x 0V
CLAMPS Screw terminals 0.2 – 2.5 mm² / 24 – 12 AWG
OUTPUTS 6×2 terminals (10mm clearance)
AC1: 16A 250V AC
AC3: 750W (engine)
AC15: 360VA
Max. inrush current: 80A/20ms
INPUTS 8 terminals: 4 x input, 4 x 0V
Digital potential-free
Input impedance: 22kOhm
POWER CONSUMPTION Max. 3.5 W / Standby 0.5 W
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S0, S2 Unauthenticated, S2 Authenticated
APPROVALS CE
DS/EN 50491-3:2009
DS/EN 60669-2-1, DS/EN60669-2-1/A1, DS/EN 60669-2-1/A12, DS/EN 60669-2-1/AC:2007

ZIF5029: Interface for Utility Meters

With ZIF5029 the consumption of e.g. water, gas, electricity or heat can be read via Z-Wave.

The module is a general purpose I/O Z-Wave interface module with 6 relay switches and 6 pulse inputs.

output  6 Relay Switches

Connect up to 6 non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave. The digital outputs can also be connected to valve actuators (24V) in a hydronic underfloor heating system.

input  6 Pulse Inputs

Connect up to 6 utility meters, where the consumption of e.g. water, gas, electricity or heating can be read via a S0 output. You can also connect secondary meters such as chargers for electric cars, solar cell production or swimmingpool heating.

Technical Data
DIMENSIONS (HXWXD) 85 mm x 105 mm x 60 mm (M36 6 module)
POWER SUPPLY 10 – 24V DC, 8 – 24V AC
2 terminals, 1 x power, 1 x 0V
CLAMPS Screw terminals 0.2 – 2.5 mm² / 24 – 12 AWG
OUTPUTS 6×2 terminals (10mm clearance)
AC1: 16A 250V AC
AC3: 750W (engine)
AC15: 360VA
Max. inrush current: 80A/20ms
INPUTS 3 terminals on top, 3 terminals in bottom
For use with dry contacts or open-collector outputs
Digital potential-free
Input impedance: 22kOhm
POWER CONSUMPTION Max. 3.5 W / Standby 0.5 W
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S0, S2 Unauthenticated, S2 Authenticated
APPROVALS CE
DS/EN IEC 63044-3:2018
DS/EN 60669-2-1, DS/EN60669-2-1/A1, DS/EN 60669-2-1/A12, DS/EN 60669-2-1/AC:2007, DS/EN 60669-1:2018