zwave  Converts devices into Z-Wave

Connect regular socket outlets, light dimmers, switches or motors and control them over the Z-Wave network.

scene Scene Control

The ZIF modules makes it possible to activate predefined scenes in a Z-Wave Controller device.

DINrail  Easy Mounting

Fits into a standard M36 DIN rail for easy mounting.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

PLUS  Z-Wave Plus

Based on the Z-Wave Plus 500 Series platform.

Initiation of Z-Wave add/remove is fulfilled by activating a push-button through a little hole in the front of the module.

ZIF modules are equipped with an LED diode in the front of the module for indicating status.

Connect your existing socket
outlets, light switches and motors
to the Z-Wave network with
ZIF5030, or ZIF5031
Connect the sensors
in your home to
the Z-Wave network
with ZIF5030
Get your underfloor
heating connected to
the Z-Wave network
with ZIF5031
Read your
meters over the
Z-Wave network
with ZIF5029

Choose your ZIF Module variant:

ZIF5030: Interface for Automations Systems

ZIF5030 makes it possible to control, automatize and make Z-Wave scenes for regular devices in your home.

The module is a general pupose Z-Wave DIN-rail module with 10 digital ouputs and 4 digital inputs.

output 10 Relay Switches

Connect up to 10 non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave. The 10 digital outputs can also be connected to valve actuators (24V-230V) in a hydronic underfloor heating system.

input 4 Digital Inputs

Connect up to 4 simple digital sensors, e.g. motions sensors or contacts (door/window contacts or wall switches) to control your Z-Wave devices.

See drawing and downloads for details.

 

Download “ZIF5030 Datasheet” zif5030_datasheet.pdf – Downloaded 3 times – 309 KB

 

EAN: 5714090000127

Technical Data
DIMENSIONS (HXWXD) 85 mm x 160 mm x 60 mm (M36 9 module)
POWER SUPPLY 100-240V AC ~ 50/60Hz
2 terminals, 1 x power, 1 x 0V
CLAMPS Screw terminals 0.05 – 3.31 mm² / 30 – 12 AWG
FUSE 3.15A Quick-Acting, UMF 250
Schurter Inc., part no.: 3405.0171.11
OUTPUTS Rated Carry Current: 5A
Max. switching voltage: 250V AC, 30V DC
Max. switching current: 5A
Max. switching power: 1,250 VA, 150W
Galvanically isolated
INPUTS Max. input voltage: 10V DC
Input Impedance: 10kOhm
Loop output voltage: 5V DC
POWER CONSUMPTION Max. 3.5 W / Standby 0.5 W
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S0, S2 Unauthenticated, S2 Authenticated
APPROVALS CE
DS/EN 50491-3: 2009
DS/EN 60669-2: 2004

ZIF5031: Interface for Underfloor Heating

With ZIF5031 it is possible to connect up to 10 actuators (24V-230V) for underfloor heating systems and control them over the Z-Wave network. 

The ZIF module is a general pupose Z-Wave DIN-rail module with 10 digital ouputs and 4 analogue inputs. 

output  10 Digital Outputs

Connect up to 10 valve actuators in a hydronic underfloor heating system and get a Z-Wave Controller to perform the heating algorithm. The 10 digital outputs can also be connected to other non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave.

input 4 Analogue Inputs

Connect up to 4 simple temperature sensors (e.g. NTC, PT1000) for use in the underfloor heating system. Other analogue 0..10V signals can also be connected (e.g. measuring air quality, humidity, light or motion) for visualization or used to control other devices in the Z-Wave network.

See drawing and downloads for details.

 

Download “ZIF5031 Datasheet” zif5031_datasheet-1.pdf – Downloaded 4 times – 303 KB

EAN: 5714090000141

Technical Data
DIMENSIONS (HXWXD) 85 mm x 160 mm x 60 mm (M36 9 module)
POWER SUPPLY 100 – 240 V AC
2 terminals, 1 x power, 1 x 0V
CLAMPS Screw terminals: 0.05-3.31 mm² / 30-12 AWG
FUSE 3.15A Quick-Acting, UMF 250
Schurter Inc., part no.: 3405.0171.11
OUTPUTS Rated carry current: 5A
Max. switching voltage: 250V AC, 30V DC
Max. switching current: 5A
Max. switching power: 1,250 VA, 150W
INPUTS Max. input voltage: 10V DC
Input impedance: 10kOhm
Loop output voltage: 5V DC
POWER CONSUMPTION Max. 3.5 W / Standby 0.5 W
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
SECURITY S0, S2 Unauthenticated, S2 Authenticated
APPROVALS CE
DS/EN 50491-3: 2009
DS/EN 60669-2: 2004