All our mains power supplied products includes following features. Click on the product tab below to see product-specific features.

wifi  Z-Wave Plus

Based on the Z-Wave Plus 500 Series platform.

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

ZHC5002: Z-Wave Coupler for GIRA pushbutton

The ZHC5002 module, together with a GIRA pushbutton module, is a Z-Wave wall switch device that can control other Z-Wave devices and activate scenes.

Control other Z-Wave Devices

Using ‘ON’, ‘OFF’ and ‘DIM’ commands

Scene Controller

Can act as a Scene Controller by transmitting different Scene Notifications, when the buttons are pressed, long-pressed and double-pressed

Control the LEDs

Use the GIRA pushbutton LEDs to signal whatever you like.

relayControl a lamp directly

The built-in relay can control a local load via one of the GIRA pushbuttons or by other Z-Wave devices. Can be used for any light source up to 13 A.

The Z-Wave insert is designed for interfacing a GIRA pushbutton to a Z-Wave network (sensor 2 module, type 2003 100).

The insert is constructed to fit into standard CE wall boxes (60 mm).

The insert contains two 10-pole connector sockets to interface the pushbutton connector pins.

Technical Data
DIMENSIONS (HXWXD) 70 mm x 70 mm x 39 mm
POWER SUPPLY 100 – 240 V AC
POWER CONSUMPTION Max. 0.6 W / 0.3 W standby
CLAMPS Screw terminals 0.2 – 2.5 mm2 / 24 – 14 AWG
CONTACTS 5 poles, 2 x looped line, 2 x looped neutral, 1 x power, 1 line output
FUSE T2A (fixed)
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S2 Security
DIRECTIVES & STANDARDS DS/EN 50491-3: 2009
DS/EN 60669-2-1: 2014

ZHC5010: Relay Wall Switch Module

ZHC5010 wall switch has four pushbuttons, four status LED diodes and one relay switch. Each of the four pushbuttons can control other Z-Wave devices.

Scene Controller

Can act as a Scene Controller by transmitting different Scene Notifications, when the buttons are pressed, long-pressed and double-pressed

  System compatibility

ZHC5010 is compatible with FUGA® frames and boxes.

LED signal

Use the LEDs to signal status of the device you are controlling.

relay  Relay switch

The built-in relay can control a local load, e.g. a lamp socket to replace a standard one-poled switch. Can be used for any light source up to 13 A.

See download for more information

(Danish only)

Download “ZHC5010 datablad” zhc5010_datablad-1.pdf – Downloaded 81 times – 193 KB

EAN: 5714090000004 (with LEDs)

EAN: 5714090000073 (without LEDs)

Technical Data
DIMENSIONS (HXWXD) 44 mm x 46 mm x 30 mm
POWER SUPPLY 100 – 230 V AC
POWER CONSUMPTION Max. 0.6 W / 0.3 W standby
CLAMPS Screw terminals 0.2 – 1.5 mm2 / 20 – 14 AWG
CONTACTS 5 poles, 2 x looped line, 2 x looped neutral, 1 relay line output
FUSE T2A (fixed)
RADIO PROTOCOL Z-Wave®: EU 868.4MHz – 500 Series
RADIO RANGE 40 m indoor / 80 m outdoor
PROTECTION RATING IP20
ENCRYPTION S2 Security