ZIF5030: Interface for Automation Systems (230V)

ZIF5030 makes it possible to control, automatize and make Z-Wave scenes for regular devices in your home.

The module is a general pupose Z-Wave DIN-rail module with 10 digital ouputs and 4 digital inputs.

SKU: ZIF5030 Categories: , , Tags: , ,

Description

zwave  Converts devices into Z-Wave

Can be used for controlling up to six 230V AC and/or DC loads through the Z-Wave network. Each relay switch is rated for loads of up to a maximum of 16A.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

scene Scene Control

The ZIF modules makes it possible to activate predefined scenes in a Z-Wave Controller device.

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

DINrail  Easy Mounting

Fits into a standard M36 DIN rail for easy mounting.

PLUS  Z-Wave Plus

Based on the Z-Wave Plus 500 Series platform.

ZIF5030: Interface for Automation Systems

input 4 Digital Inputs

Connect up to 4 simple digital sensors, e.g. motions sensors or contacts (door/window contacts or wall switches) to control your Z-Wave devices.

output 10 Relay Switches

Connect up to 10 non-Z-Wave actuators or relay modules, thereby getting control of other home automation systems with Z-Wave. The 10 digital outputs can also be connected to valve actuators (24V-230V) in a hydronic underfloor heating system.

Initiation of Z-Wave add/remove is fulfilled by activating a push-button through a little hole in the front of the module.

ZIF modules are equipped with an LED diode in the front of the module for indicating status.

Connect your existing socket
outlets, relay switches and motors
to the Z-Wave network with
ZIF5020ZIF5028 or ZIF5029
Connect the sensors
in your home to
the Z-Wave network
with ZIF5028
Get your underfloor
heating connected to
the Z-Wave network
with ZIF5020
Read your
meters over the
Z-Wave network
with ZIF5029

Additional information

Dimensions (HxWxD)

86 mm x 160 mm x 58 mm (M36 9 module)

Power Consumption

Max. 3.5 W / Standby 0.5 W

Protection Rating

IP20

Radio Protocol

Z-Wave®: EU 868.4MHz – 500 Series

Radio Range

40 m indoor / 80 m outdoor

Power Supply

230 V AC / 50 Hz

Outputs

Galvanically isolated, Max. switching current: 5A, Max. switching power: 1,250 VA, 150W, Max. switching voltage: 250V AC, 30V DC, Rated Carry Current: 5A

Inputs

Input Impedance: 10kOhm, Loop output voltage: 5V DC, Max. input voltage: 10V DC

Encryption

S0 Security, S2 Security

Inclusion

Classic Inclusion

Approvals

CE, DS/EN 50491-3:2009, DS/EN 60669-2: 2004

EAN

5714090000127