MATRIX Socket Outlet

With MATRIX Socket outlet Type ZSO7300 you can keep an eye on your power consumption and reduce your standby consumption.

SKU: ZSO7300 Categories: , , Tags: ,

Description

Z-WaveZ-Wave Controlled Devices

Any device with a plug can be plugged in and controlled over the Z-Wave network – e.g. from a wall switch or a scene.

Power Metering

Measure your power consumption on each Socket outlet installed, whether it is a single device or a power strip.

LED switch

Turn on/off using the LED lit switch. The LED can light up in all RGB colours and signal status of the plugged in device.

wifi  Z-Wave Plus

Based on the Z-Wave Plus 700 Series platform.

Compatibility

Designed to fit into FUGA® 1½ module wall boxes and cover frames.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

Intelligent consumption with MATRIX Socket Outlet

Construction

  1. A Cover Frame of your choice (1½ module, not included).
  2. The Casing with all the magic inside.
  3. The Cover is a translucent white plastic that matches your existing frames, socket outlets and wall switches.

Additional information

Dimensions (HxWxD)

71 mm x 46 mm x 33 mm (1½ module)

Connection

6 poles, 2 x looped line, 2 x looped ground, 2 x looped neutral

Clamps

Screwless 0.2 – 2.5 mm2 / 24 – 12 AWG

Power Supply

230 V AC / 50 Hz

Power Consumption

Max. 1 W, Standby 0.6 W

Internal fuse

T2A (fixed)

Max. Attachable Load

13 A, 13A / 2990 W at 230V DC

Protection Rating

IP20

Radio Protocol

Z-Wave®: EU 868.4MHz – 700 Series

Radio Range

Up to 100 m indoor / Over 200 m outdoor

Encryption

S0 Security, S2 Security

Approvals

DS/EN 50491-3:2009, DS/EN 60669-2-1, DS/EN IEC 63044-3:2018, DS/EN60669-2-1/A1

Inclusion

Classic Inclusion, SmartStart

EAN

5714090000189