MATRIX ZBA

MATRIX Type ZBA7140 is a wall switch that can control other Z-Wave devices with each of the four pushbuttons. MATRIX ZBA is completely wireless and can be placed everywhere with double sided tape or screws.

SKU: ZBA7140 Categories: ,

Description

Use MATRIX ZBA in combination with DIMMY or MATRIX ZRB, MATRIX ZDB or other Z-Wave devices to control lights, curtains, relays etc.

wifi 4 Z-wave Scene Controllers

Up to 16 possibilies with single-press, double-press, triple-press, long-press and release actions for each of the four buttons.

  System compatibility

Matrix ZBA fits into all FUGA® compatible coverframes and boxes.

Long Battery Life

The replaceable battery lasts up to 5 years.

Cleaning-friendly

Elegant and cleaning-friendly front. No visible marks from fingerprints.

wifi  Z-Wave Plus

Based on the Z-Wave Plus 700 Series platform.

  Tactile touch

The four switches are designed with luxury and tactility in mind.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

Add Symbols to your MATRIX

Make it easier for you, your spouse and your guests to navigate your Logic Home. With our Matrix Customizer you can freely combine symbols from our library and your text to fit your MATRIX’ functions.

The symbols are laser engraved on the pushbuttons, thereby lasting for the lifetime of the product.

Construction

  1. A Cover frame of your choice (1 module, not included).
  2. The Battery is replaceable.
  3. The Casing with all the magic inside.
  4. The Pushbutton is a translucent white plastic that matches your existing frames, socket outlets and wall switches
Mounting guide
Warning! Only authorised technicians under consideration of the country-specific installation norms may do works with 230 Volt mains power. Prior to the assembly of the product, the voltage network has to be switched off.

 

Wiring

Dimmed output (~), Neutral (N) and Line (L) must be connected according to the diagram below. Contacts with same markings (N or L) are internally connected and can be used for cable looping.


Cable Connection/Disconnection

Use a cable, max. 1,5 mm², with a stripped length of 9-10 mm. Solid cables are simply pushed into the connection terminals, whereas stranded cables must be connected by pressing a slotted screwdriver with 2,5 mm slot against release button while pushing in the cable (A). When disconnecting a cable use the release button as described above.

Demounting the Pushbutton Cover

To mount/unmount MATRIX the pushbutton cover must be removed. Loosen the cover with a slotted screwdriver; first insert it in the top (B) aftwerwards in the bottom (C).

Hold the top of the cover while the bottom is released.

Demounting from Cover Frame

MATRIX is demounted from a cover frame by inserting a slotted screwdriver in the two points (D) og (E).

Adding/Removing

Add/remove units in the Z-Wave network by pushing the center switch (I) with a non-conductive object. The LEDs of pushbutton 1 will now start blinking.

Restore Factory Settings

Factory settings are restored by pressing the center switch (I) and hold it for min. 10 seconds.

Customize your MATRIX

Make it easier for you, your spouse and your guests to navigate your Logic Home. With our Logic Symbol Customizer you can freely combine symbols from our library and your text to fit your MATRIX’ functions.

The symbols are laser engraved on the pushbuttons, thereby lasting for the lifetime of the product.

Additional information

Dimensions (HxWxD)

44 mm x 46 mm x 8 mm

Power Supply

Coin cell battery CR2032 3V

Power Consumption

Approximately 2 μA in sleep mode

Protection Rating

IP20

Radio Protocol

Z-Wave®: EU 868.4MHz – 700 Series

Radio Range

Up to 100 m indoor / Over 200 m outdoor

Battery life

5-10 years depending on usage

Encryption

S0 Security, S2 Security

Inclusion

Classic Inclusion, SmartStart

EAN

5714090000240