MATRIX ZRB

With our innovative Matrix ZRB we have put light inside your traditional wall switch and combined it with wireless technology.

SKU: ZRB5120 Categories: , , Tags: ,

Description

MATRIX ZRB: Double relay and Backlight

MATRIX ZRB wall switch has two relay switches, multipurpose backlight and wireless Z-Wave communication with 4 scene controllers.

The two built-in relays can control local loads, e.g. lamp sockets, thereby replacing a standard two-poled switch.

Use MATRIX ZRB where you want control of two separate lights or where you cannot use a light dimmer. For instance with flourecent lights.

relay Relay switches

Can be used to control any two devices using max. 5 A or 1000 W in total for both relays.

  System compatibility

Matrix ZDB is designed to fit into all FUGA® compatible coverframes and boxes.

repeater  Improves Z-Wave Network

Acts as a Z-Wave network repeater to increase reliability of the network.

  Tactile touch

The four switches are designed with luxury and tactility in mind.

wifi 4 Z-wave Scene Controllers

Up to 16 possibilies with single-press, double-press, triple-press, long-press and release on each of the four buttons.

Cleaning-friendly

Elegant and cleaning-friendly front. No visible marks from fingerprints.

Multi Functional Backlight

The squares can light up in all colors which can be used to show the status of a lamp, as orientation light during nighttime, visual alarm and much more.

wifi  Wireless Updates

Firmware can be updated through the Z-Wave network (OTA firmware updates).

wifi  Z-Wave Plus

Based on the Z-Wave Plus 500 platform.

Pushbutton Backlight

Get inspiration for usage of the backlight in the four pushbutton squares.

GUEST MODE

Ever had your guests confused about your smart home? Put your home in guest mode and light up selected squares in green. These are your guest switches.

GUEST MODE

Ever had your guests confused about your smart home? Put your home in guest mode and light up selected squares in green. These are your guest switches.

WARNING LIGHT

Let MATRIX light up in red if the stove or iron is on. Or if the smoke detector senses smoke at your grandma’s house.

WARNING LIGHT

Let MATRIX light up in red if the stove or iron is on. Or if the smoke detector senses smoke at your grandma’s house.

ORIENTATION

Use MATRIX as orientation light during the night, or as a night lamp for your kids.

ORIENTATION

Use MATRIX as orientation light during the night, or as a night lamp for your kids.

OPEN WINDOW

Never leave the house with open windows again! Together with a door/window sensor you can let the MATRIX at your doorway light up if a window in your house is still open.

OPEN WINDOW

Never leave the house with open windows again! Together with a door/window sensor you can let the MATRIX at your doorway light up if a window in your house is still open.

BECOME THE OMNISCIENT PARENT

Let MATRIX in the living room light up if the desk lamp, night lamp or stationary computer is on in the child’s room. But never let them know how you know!

BECOME THE OMNISCIENT PARENT

Let MATRIX in the living room light up if the desk lamp, night lamp or stationary computer is on in the child’s room. But never let them know how you know!

Customize your MATRIX

Make it easier for you, your spouse and your guests to navigate your Logic Home. With our Logic Symbol Customizer you can freely combine symbols from our library and your text to fit your MATRIX’ functions.

The symbols are laser engraved on the pushbuttons, thereby lasting for the lifetime of the product.

Construction

  1. A Cover Frame of your choice (1 module, not included).
  2. The Casing with all the magic inside.
  3. The Pushbutton is a translucent white plastic that matches your existing frames, socket outlets and wall switches.
Mounting guide
Warning! Only authorised technicians under consideration of the country-specific installation norms may do works with 230 Volt mains power. Prior to the assembly of the product, the voltage network has to be switched off.

 

Wiring

Relay output (arrow 1 and 2), Neutral (N) and Line (L) must be connected according to the diagram below. Contacts with same markings (N) are internally connected and can be used for cable looping.


Cable Connection/Disconnection

Use a cable, max. 1,5 mm², with a stripped length of 9-10 mm. Solid cables are simply pushed into the connection terminals, whereas stranded cables must be connected by pressing a slotted screwdriver with 2,5 mm slot against release button while pushing in the cable (A). When disconnecting a cable use the release button as described above.

Demounting the Pushbutton Cover

To mount/unmount MATRIX the pushbutton cover must be removed. Loosen the cover with a slotted screwdriver; first insert it in the top (B) aftwerwards in the bottom (C).

Hold the top of the cover while the bottom is released.

Demounting from Cover Frame

MATRIX is demounted from a cover frame by inserting a slotted screwdriver in the two points (D) og (E).

Adding/Removing

Add/remove units in the Z-Wave network by pushing the center switch (I) with a non-conductive object. The LEDs of pushbutton 1 will now start blinking.

Restore Factory Settings

Factory settings are restored by pressing the center switch (I) and hold it for min. 10 seconds.

Additional information

Radio Range

40 m indoor / 80 m outdoor

Radio Protocol

Z-Wave®: EU 868.4MHz – 500 Series

Protection Rating

IP20

Power Supply

230 V AC / 50 Hz

Power Consumption

Max. 1 W, Standby 0.6 W

Max. Attachable Load

1000 W total

Internal fuse

T2A (fixed)

Dimensions (HxWxD)

44 mm x 46 mm x 30 mm (1 module)

Connection

5 poles: 1 x line, 2 x looped neutral, 2 x relay output

Clamps

Screwless terminals: 0.5 – 1.5 mm2 / 20 – 14 AWG

Encryption

S0 Security, S2 Security

Inclusion

Classic Inclusion

EAN

5714090000172