Description
MATRIX ZDB: Dimmer and Backlight
With its built-in universal light dimmer, backlit switches and wireless Z-Wave technology MATRIX ZDBreally outsmarts your old wall switches.
The built-in light dimmer can control a local load, e.g. a lamp socket to replace a standard one-poled switch.
State-of-the-art light dimmer
The light dimmer can dim all dimmable light bulbs from 0-250 W. Even your low power LED bulbs.
System compatibility
Matrix ZDB is designed to fit into all FUGA® compatible coverframes and boxes.
Improves Z-Wave Network
Acts as a Z-Wave network repeater to increase reliability of the network.
Tactile touch
The four switches are designed with luxury and tactility in mind.
4 Z-wave Scene Controllers
Up to 16 possibilies with single-press, double-press, triple-press, long-press and release on each of the four buttons.
Cleaning-friendly
Elegant and cleaning-friendly front. No visible marks from fingerprints.
Multi Functional Backlight
The squares can light up in all colors which can be used to show the status of a lamp, as orientation light during nighttime, visual alarm and much more.
Wireless Updates
Firmware can be updated through the Z-Wave network (OTA firmware updates).
Z-Wave Plus
Based on the Z-Wave Plus 500 platform.
Pushbutton Backlight
Get inspiration for usage of the backlight in the four pushbutton squares.
GUEST MODE
Ever had your guests confused about your smart home? Put your home in guest mode and light up selected squares in green. These are your guest switches.
GUEST MODE
Ever had your guests confused about your smart home? Put your home in guest mode and light up selected squares in green. These are your guest switches.
OPEN WINDOW
Never leave the house with open windows again! Together with a door/window sensor you can let the MATRIX at your doorway light up if a window in your house is still open.
OPEN WINDOW
Never leave the house with open windows again! Together with a door/window sensor you can let the MATRIX at your doorway light up if a window in your house is still open.
BECOME THE OMNISCIENT PARENT
Let MATRIX in the living room light up if the desk lamp, night lamp or stationary computer is on in the child’s room. But never let them know how you know!
BECOME THE OMNISCIENT PARENT
Let MATRIX in the living room light up if the desk lamp, night lamp or stationary computer is on in the child’s room. But never let them know how you know!
Add Symbols to your MATRIX
Make it easier for you, your spouse and your guests to navigate your Logic Home. With our Matrix Customizer you can freely combine symbols from our library and your text to fit your MATRIX’ functions.
The symbols are laser engraved on the pushbuttons, thereby lasting for the lifetime of the product.
Construction
- A Cover Frame of your choice (1 module, not included).
- The Casing with all the magic inside.
- The Pushbutton is a translucent white plastic that matches your existing frames, socket outlets and wall switches.
Warning! Only authorised technicians under consideration of the country-specific installation norms may do works with 230 Volt mains power. Prior to the assembly of the product, the voltage network has to be switched off.
Wiring
Dimmed output (~), Neutral (N) and Line (L) must be connected according to the diagram below. Contacts with same markings (N or L) are internally connected and can be used for cable looping.
Cable Connection/Disconnection
Use a cable, max. 1,5 mm², with a stripped length of 9-10 mm. Solid cables are simply pushed into the connection terminals, whereas stranded cables must be connected by pressing a slotted screwdriver with 2,5 mm slot against release button while pushing in the cable (A). When disconnecting a cable use the release button as described above.
Demounting the Pushbutton Cover
To mount/unmount MATRIX the pushbutton cover must be removed. Loosen the cover with a slotted screwdriver; first insert it in the top (B) aftwerwards in the bottom (C).
Hold the top of the cover while the bottom is released.
Demounting from Cover Frame
MATRIX is demounted from a cover frame by inserting a slotted screwdriver in the two points (D) og (E).
Adding/Removing
Add/remove units in the Z-Wave network by pushing the center switch (I) with a non-conductive object. The LEDs of pushbutton 1 will now start blinking.
Restore Factory Settings
Factory settings are restored by pressing the center switch (I) and hold it for min. 10 seconds.
