Firmware updates
Here you can find firmware updates for your Logic Group devices (formerly Logic Soft and Logic Home Control).
Firmware is updated via "Over The Air" (OTA) device update. There is no need to connect the device to a controller or PC via cable as the device firmware can be updated directly over the Z-Wave wireless network.
The firmware files that can be downloaded from this page have the file extension .OTA. In some controllers, files must be of type .HEX - in these cases the file extension can simply be renamed as the firmware file is already a hex file.
Please contact support@logic-group.com if you are missing material or have questions about our products and firmware.
Update program
With our Firmware Loader Common, you can update all types of devices from Logic Group.
Follow our guide to firmware update with Firmware Loader Common.
It will log the device out of your smart home and you will have to log it back in afterwards. All setup will be deleted and you will have to do it all over again.
As written, it requires a Z-Wave USB adapter.
PC Controller 5
With the same Z-Wave USB adapter, you can also download and install the Silabs PC Controller 5.
Follow our guide to firmware update with PC Controller 5 here.
If you follow the instructions, you can include the Z-Wave USB adapter and firmware update your devices without them being announced. This way your programming will not be lost.
We can do it
Alternatively, you are of course welcome to send them to us and we will do it all for you. Your devices will be notified in connection with the update and testing.
Alternatively, we can come to you and do it on your premises. This way you don't lose your programming.
This will be billed as an hourly rate for full hours started.
NB. Do not use a Z-Wave USB adapter that is in use by a running controller, as the firmware update will reset your interface!
MATRIX Operating pressure
Type: ZDB5100
Z-Wave push button with dimmer and backlit keys. DK format.
Firmware version 1.08 (March 15, 2022):
Problem with single-channel associations is solved (problem with association to DIMMY version 1.01).
Synchronous flashing with backlight.
Set level for the next time the light turns on.
MATRIX Operating pressure
Type: ZRB5120, ZRB5118
Z-Wave push button with dual relay and backlit keys. DK format.
Firmware version 0.05 (beta) (November 2, 2021):
The two relays can now be used for motor control, see user manual section 5.5 and section 5.6. Configuration parameters 1 - 4 now determine how and which buttons will control the 2 relay outputs.
Firmware version 0.03 (beta)
Improved feedback to keys so that the status is updated correctly when the relays are controlled externally (from the Controller) or if multiple keys control the same relay. Problem with single channel associations has also been fixed.
MATRIX ZBA
Type: ZBA7140
Z-Wave battery-operated push button. DK format.
MATRIX Socket
Type: ZSO7300
Intelligent socket outlet with earth, switch, LED indication, Z-Wave and power measurement
Firmware version 1.08 (April 26, 2023):
Calculation of consumption in HC3 is fixed as well as overload errors.
MATRIX 55
Type: ZDB5400
Z-Wave Control Touch with dimmer and backlit keys. CE format.
Firmware version 1.02 (November 19, 2020):
Bug fix
DIMMY
Type: ZDI5200
Z-Wave universal dimmer with consumption metering
Firmware version 2.02 (May 26, 2021):
This firmware update makes DIMMY a Multichannel device. Furthermore, it fixes issues with the Basic Set command and the problem with a PIR always turning Dimmy on 10%.
ZIF5020 DIN rail module for Underfloor heating
12-24V DC
Z-Wave DIN rail ZIF module
Previous: LHC5020
Firmware version 2.01 (November 27, 2020):
Better and more stable functionality. Backwards compatible with older hardware versions.
ATTENTION. When updating the firmware in the ZIF5020 to version 2.01, it will lose its network information and will require a re-enrollment in the Z-Wave network.
ZIF5028 DIN rail module for Automatik
12-24V DC
Z-Wave DIN rail ZIF module
Previous: LHC5028
Firmware version 0.15 (November 19, 2020):
Bug fix
ATTENTION. When updating the firmware in the ZIF5028 to version 0.15, it will lose its network information and will require a re-enrollment in the Z-Wave network.
ZIF5029 DIN rail module for consumption meters
12-24V DC
Z-Wave DIN rail ZIF module
Firmware version 1.00 (June 18, 2018):
ATTENTION. When updating the firmware in the ZIF5029 to version 1.00, it will lose its network information and will require a re-enrollment in the Z-Wave network.
ZIF5030 DIN rail module for Automatik
100-240V AC
Z-Wave DIN rail ZIF module
Previous: LHC5030
No firmware updates
ZIF5031 DIN rail module for Underfloor heating
100-240V AC
Z-Wave DIN rail ZIF module
Previous: LHC5031
No firmware updates
Are you interested?
If you are interested in learning more about Logic Group smart home, contact our electrician and smart home specialist
Direct email: nhy@logic-group.com
NICKLAS HYLLEBERG+45 21 89 53 43